30 TON COMPACTING PRESS

DMC-30_Knuckle Type

30 TON COMPACTING PRESS

DMC-30_Knuckle Type

  • The upper ram in knuckle type makes the compacting easier and provides excellent moldability.
  • The consistent filling amount and adequate filling power can be adjusted with the lower ram filling power that runs by an air cylinder.
  • It performs excellent moldability based on hydraulic and pneumatic density balance control.
  • The stopper position can be adjusted, and it is easy to set the pressure for both simultaneous and non-simultaneous.
  • The product is always ejected on the same place regardless of its depth. It eliminates the adjustment per product and provides convenience for designing.
  • The operation can be observed with an indicator, which is directly connected to a handle shaft, allowing easy control of each section and accurate setting.

SPECIFICATION

Technical Data

DESCRIPTION UNIT DMC-30
1. Max. Pressing Capacity ton 30
2. Max. Ejecting Capacity ton 20
3. Max. Filling Depth mm 100
4. Max. Ejecting Stroke mm 100
5. Upper Ram Stroke mm 150
6. Die Control Stroke mm 100
7. Upper Punch Adjustment mm 60
8. Die Face Adjustment Stroke mm ±5
9. Max. Diameter of Compact mm 75
10. Die Stopper Capacity ton 10
11. Compacting Speed (60Hz) SPM 13 – 40
12. Compression indicator Oil Pressure Gauge
13. Motor KW 5.5
14. Speed Changer Inverter
15. Clutch & Brake Spring Return Type / Air Clutch
16. Lubrication Centralized Oil Lubrication
17. Working Air Pressure kg/cm2 5-7
18. Hopper Capacity (approx.) liter 18
19. Reducer Type Cyclo Reducer
20. Net Weight (approx.) kg 4,000
21. Dimension (approx.) mm H2,655 × W1,555 × D1,400

Figure : Front and Side Views

Cycle Diagram