40 TON COMPACTING PRESS

DMC-40_Knuckle Type

40 TON COMPACTING PRESS

DMC-40_Knuckle Type

  • The upper ram in knuckle type makes the compacting easier and provides excellent moldability.
  • The consistent filling amount and adequate filling power can be adjusted with the lower ram filling power that runs by an air cylinder.
  • It performs excellent moldability based on hydraulic and pneumatic density balance control.
  • The stopper position can be adjusted, and it is easy to set the pressure for both simultaneous and non-simultaneous.
  • The product is always ejected on the same place regardless of its depth. It eliminates the adjustment per product and provides convenience for designing.
  • The operation can be observed with an indicator, which is directly connected to a handle shaft, allowing easy control of each section and accurate setting.

SPECIFICATION

Technical Data

DESCRIPTION UNIT DMC-40
1. Max. Pressing Capacity ton 40
2. Max. Ejecting Capacity ton 40
3. Max. Filling Depth mm 120
4. Max. Ejecting Stroke mm 120
5. Upper Ram Stroke mm 175
6. Die Control Stroke mm 120
7. Upper Punch Adjustment mm 70
8. Die Face Adjustment Stroke mm ±10
9. Max. Diameter of Compact mm 100
10. Die Stopper Capacity ton 15
11. Compacting Speed (60Hz) SPM 8 – 24
12. Compression indicator Oil Pressure Gauge
13. Motor KW 7.5
14. Speed Changer Inverter
15. Clutch & Brake Spring Return Type / Air Clutch
16. Lubrication Centralized Oil Lubrication
17. Working Air Pressure kg/cm2 5-7
18. Hopper Capacity (approx.) liter 60
19. Reducer Type Cyclo Reducer
20. Net Weight (approx.) kg 6,000
21. Dimension (approx.) mm H3,280 × W1,875 × D1,400

Figure : Front and Side Views

Cycle Diagram