100톤 성형 프레스

DMC-100_Crank Type

100톤 성형 프레스

DMC-100_Crank Type

  • 구동부가 상단에 있으므로 하단부 점검 및 부대설비의 설치가 용이합니다.
  • 작업공간이 넓고 DIE SET를 전후방에서 탈착 할 수 있어 교환이 편리하며 전면에 자동화 설비 및 성형품 이송장치 등의 설치가 용이합니다.
  • 성형품 방출위치가 충진깊이와 관계없이 항상 일정하여 별도의 방출조정이 필요없고 금형 설계시에도 편리합니다.
  • 상부램에 스트로크가 긴 홀드다운 실린더가 내장되어 있어 다이에서 제품이 방출 될 때까지 상펀치가 성형품을 늘려 줄 수 있기 때문에 큰 성형품을 방출시 스프링 백에 의한 크랙 방지에 우수한 성능을 발휘합니다.
  • 터치스크린에서 조정 장치를 간편하게 설정할 수 있으며, 디지털 카운터에 의해 설정 값이 표시 되기 때문에 작업자는 쉽게 조정량을 설정하고 확인 할 수 있습니다.

SPECIFICATION

Technical Data

DESCRIPTION UNIT DMC-100
1. Max. Pressing Capacity ton 100
2. Max. Ejecting Capacity ton 60
3. Max. Filling Depth mm 150
4. Max. Ejecting Stroke mm 100
5. Upper Ram Stroke mm 200
6. Die Control Stroke mm 50
7. Upper Punch Adjustment mm 120
8. Die Face Adjustment Stroke mm ±10
9. After Pressing Stroke mm 10
10. Die Stopper Capacity ton 50
11. Max. Diameter of Compact mm Ø100
12. Compacting Speed SPM 6 – 24
13. Upper Punch Hold down 120
14. Under & Over Fill (Air) 7.5
15. Upper Punch, Filling, Stopper After Pressing, Die Face Adjustment Motor Control
16. Compression Indicator Digital Pressure Gauge
17. Motor KW 18.5
18. Speed Changer Type Inverter
19. Clutch & Brake Spring Return Type / Air Clutch
20. Lubrication System Centralized Oil Lubrication
21. Working Air Pressure kg/cm2 5-7
22. Weight (approx.) ton 15
23. Rotary Cam Switch Electric Type
24. Reducer Type Helical Gear
25. Dimension (approx.) mm H5,700 × W2,875 × D1,820

Figure : Front and Side Views

Cycle Diagram